At the CMS Jant factory, in the rim painting area, an air handling unit with a high-pressure humidification system was used to climate control the environment, ensuring flawless results on the products. The system operates with proportional control, aiming to increase or decrease the humidification capacity as needed, thereby providing energy and water savings.
At the ISKO Denim factory owned by Sanko Holding in Bursa-Inegöl, a specific humidity level is maintained to process cotton yarn without breakage. The air handling unit, designed to climate control the production area, has a capacity of 125,000 m³/h due to the large size of the facility. The humidification process in these units is handled using our high-pressure systems.
At the JTI tobacco production facility in Iran, a high-pressure humidification system is used within the air handling unit to control the environment. The system operates with proportional control, aiming to increase or decrease the humidification capacity as needed, thereby providing energy and water savings.
For the production facility located in Esenyurt, an evaporative humidification system is used within the air handling unit to control the environment. This system provides both evaporative cooling and humidification simultaneously. By using this unit, the capacity of the cooling coil has been reduced, leading to lower investment costs.
At the TRT center in Çankaya, Ankara, our commercial type dehumidifier is used to reduce high humidity levels in two cold storage rooms where old documents and video cassettes are kept at temperatures of +4°C and 12°C. This ensures proper storage conditions for these items.
In the factory in Diyarbakır, where temperatures can reach up to 40°C in the production area, evaporative cooling systems are used for high efficiency in dry and hot climates. These systems provide fresh air and cool the indoor environment by humidifying the air. Our device, which is the most energy-efficient solution for cooling large volumes, addresses this need effectively.